Flat Yorkshire pudding! (2024)

FAQs

What makes Yorkshire pudding flat? ›

One of the main reasons why Yorkshires don't rise is because the oil isn't hot enough, so make sure it's bubbling and sizzling as you pour your batter in. Make sure you aren't over-filling the tin – fill each hole about a third or halfway up, any more and they may collapse through the weight of batter.

For Yorkshire puddings to soar, the temperature must too – so never open the oven door when they are cooking, to keep the oven as hot as possible. If opening the oven door is absolutely essential your Yorkshire puddings won't be ruined, but they just won't rise as much as they should.

The fat isn't hot enough (it should be smoking hot). The oven isn't getting hot enough (needs to maintain a 220C/425F temperature). Your oven loses heat too quickly when you open the oven door and/or you leave the oven door open for too long whilst you're filling up the Yorkshire pudding tins with batter.

How do you make Yorkshire puddings rise higher? Let the batter sit. Make sure you rest your batter rest for at least an hour before you cook to ensure a good rise and deliciously light puddings.

While it doesn't need to be cold, your batter should have time to rest. Our no-fail yorkies recipe recommends transferring your batter to a jug after mixing, then leaving it to rest for at least 15 minutes.

If you want to go Instagram-ready with sky-high fluffy Yorkshires, add an extra egg white to your batter. They'll tower over the competition. With that in mind, always make sure your Yorkshire puddings have room to rise in the oven.

Don't Open the Oven Door

Avoid opening the oven door during cooking because the cooler air will make the puddings collapse. Sometimes they make a recovery but will never rise quite as high as they should.

What consistency should Yorkshire pudding mix be? For perfect Yorkies, you need a consistency of heavy cream, so really quite runny but not milk-runny. To make sure you achieve this I suggest pouring half of the liquid in and then slowly adding more until you reach the consistency.

This is about the oil. As mentioned, you need the oil to be very hot before adding your batter, but it's also important to use the right amount. Too much will make the bottom of your Yorkshires greasy, while too little could see your puds stick to the pan.

If the batter in the centre still remains under cooked then you may need to reduce the oven temperature by 20-40c (50-75F) after the initial cooking and give the pudding an extra 5 minutes in the lower oven at the end to cook through.

Does baking powder make Yorkshires rise? ›

No and here is the reason why! It must be plain flour (no baking powder). 1/ High temperature oven. Yorkshire puddings rise due to quick cooking of the flour and steam being formed in the batter mixture, hence the requirement of a very hot oven and hot oil as you pour the batter into the yorkshire pudding tin.

To make the batter, tip 140g plain flour into a bowl and beat in 4 eggs until smooth. Gradually add 200ml milk and carry on beating until the mix is completely lump-free. Season with salt and pepper. Pour the batter into a jug, then remove the hot tins from the oven.

Bake Yorkshire puddings on the top shelf of your oven as this is where it's hottest. Get the oil as hot as you can! It should sizzle when you add the batter. Don't open the oven door during cooking or they could deflate.

A common fault that results in flat yorkshires is not having things hot enough. The oven needs to be very hot, and you need to use a metal dish with fat or oil that is hot enough to sizzle when you pour the mixture in. Get it straight into the oven and do not open the door for the duration of the cooking time.

Cold batter and hot oil are the successful combination for a well risen and crisp pudding. Make sure your Rapeseed Oil is smoking hot before pouring your batter into the tin. It's the best oil for the job.

This needs to get to the exact temperature and be piping hot to ensure the maximum sizzle for the maximum rise in those puds! The oven temperature you'll need is around 220oC / 200oC Fan. What oil is best for Yorkshire puddings? We believe that a cold pressed Rapeseed Oil is the best oil for the job.

The logic behind this is that rising agents like bicarb and baking powder cause the batter to rise too quickly before the gluten has time to strengthen the mix, causing the pudding to collapse.