In Fudge 101wecovered a brief introduction of what is fudge, the ingredients of fudge, and the technique of making fudge. Fudge 102 is aimed at the newbie who is going to try their hand at making fudge. Now it’s getting exciting.
How long does it take to make fudge:
- about 18 min to reach boiling
- about 40 minutes to reach soft ball stage
- 60 minutes to cool
- 28 minutes to beat in a KitchenAid (your time for this may vary)
- 4 hours to set
Tips for the fudge newb:
Check the weather. If it’s humid don’t make fudge today.
You don’tneeda candy thermometer, but the ball stage is difficult for a newb to judge correctly, and the window of time between under-cooked and over-cooked is razor-thin. Save yourself the tears and get a good, digital candy thermometer. I havethis Taylor thermometerwhich is available onAmazon.comfor $22., I picked mine up at the St. Lawrence Market and also use it for tempering chocolate.
Get everything ready before you turn on the stove. Line your pan with foil and grease it. Completely grease the pot you’ll cook the sugar in, right up to the edge. Grease the wooden spoon or beater blade.
Have a jug of cold water in the fridge, and a larger pan set on the counter to be the water bath.
Read your recipe thoroughly, make sure you understand when to stir and when not to. Understand at what point you add any extras like nuts or fruit (typically right before it’s ready to be poured into the pan).
Beware the recipe that tells you to chill the fudge to ensure it sets. Proper fudge will set after sitting at room temperature for about 4 hours.
Understand that cooking the fudge properly is the skirmish before the war. The real test of your mettle will occur when you beat the fudge, and learn to master the fine art of turning and pouring. And if it doesn’t work out it’s okay! Don’t give up.
What works for one person…
- some recipes insist on cream, others use milk
- some add the butter at the beginning, others add it when the vanilla is added
- some people use a wet pastry brush to wipe away sugar crystals
- some people only beat by hand, others use a hand mixer or stand mixer
Personally, I use 2% milk, becauseevery timeI made fudge with cream it failed. I add the butter at the beginning, and beat it using my KitchenAid. My fudge never turned out until I started using a water bath, and I am still mastering when to stop beating it.
Equipment:
- digital candy thermometer, remember to calibrate it
- heavy-bottom sauce pot, ideally with straight sides so you can clip thermometer onto it
- sturdy wooden spoons (avoid metal which conducts the insane heat right into your skin)
- hand mixer or stand mixer (unless you’re a masoch*st and you actually want to beat fudge by hand, in which case have at it)
- 8″ square pan + one bigger pan to serve asthe cold water bath
- tin foil
OK! I’m ready to get fudging!
Just one more thing! I talked earlier about when the thermometer hits “soft ball” (235°F to 240°F, or 112.78°C to 115.55°C) you should remove the pot from the heat immediately and place it in a cold water bath.
Not all fudge-makers use a cold bath, but I recommend it for this reason: supersaturated sugar is so hot, it continues to cook after you remove it from the heat (like taking something out of the microwave, it keeps getting hotter). If you are removing the fudge from the stove at the top of the soft ball range, which is no higher than240°F or 116°C , your fudge willcook itselfright past the optimum temperature and no wonder it’s not going to set.
Once it starts creeping up to the ideal range, I watch it like a hawk, and as soon as it’saboutto hit soft ball (it’s one or two tenths of a degree away), I take it off the stove and set it in the water bath pan. As soon as the temperature peaks I add the cold water so that way it can’t get past soft ball. Thetemperature will begin to drop and now you can’t exceed the soft ball stage. Make sense?
Let the pot sit undisturbed between 30-60 minutes, until temperature drops to 100°F or 37.77°C. Some people say you don’t need to go this low, but I’ve started aiming for this temperature after reading how cooler sugar crystals stay smaller (to avoid grainy fudge).
Then, andonly then, are you ready for the final confrontation.
FAQs
Beat the mixture
After letting the fudge cool, it's time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould.
What happens if you don't beat fudge long enough? ›
It might be that you haven't dissolved all the sugar before boiling the fudge mixture. It could be that there just wasn't enough fluid or fat to enable the sugar to dissolve or it might even be that the fudge wasn't beaten long enough or hard enough. All of these factors could be the cause of grainy fudge.
What happens if you beat fudge too soon? ›
Sugar Crystals Formed
It's important to beat the fudge ingredients to develop the right texture, but you won't get smooth, creamy fudge if you beat it when it's too hot. Beating fudge when it's still over heat creates sugar crystals, aka the grittiness you feel in the fudge.
Can I beat fudge with an electric mixer? ›
While beating by hand is the traditional method, you can use an electric mixer if you have one. Fit the mixer with the paddle attachment and turn it on medium. Beat it just until it starts to thicken and lose its gloss. It is easy to overbeat fudge with a mixer, so watch it carefully and check it after every minute.
Why won t my fudge go hard? ›
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
What to do with failed fudge? ›
Options for what you can do with your unset fudge:
OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.
What is the soft ball test for fudge? ›
For perfect fudge, the syrup should form a soft ball that can be picked up, but easily flattened. If the syrup is undercooked, drops of syrup will sink to the bottom of the glass in threads or simply dissolve. If the syrup is overcooked, the ball will be hard and difficult to flatten with your fingers.
Why won't my 3 ingredient condensed milk fudge set? ›
Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.
What is the secret of making great fudge? ›
While you ultimately want crystals to form, it's important that they don't form too early. The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.
Do you stir fudge while boiling? ›
Avoid Stirring Once the Mixture Comes to a Simmer
Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.
Overcooked fudge, which goes beyond 239 F, evaporates the water, which isn't what you want. It also matters how you treat the fudge after it's cooked. Avoid too much stirring while you are heating the fudge since this agitates the sugar and causes it to clump into sugar crystals again.
What is the purpose of beating fudge? ›
The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.
What is the secret to smooth fudge that is not gritty? ›
Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture. As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon.
Why did my fudge turn out like taffy? ›
If the temperature is too low, the fudge will be too soft and sticky, and if it's too high, it will turn into a hard, crumbly mess. The ideal temperature to cook fudge is between 232-234 degrees F (111-112 degrees C).
How long do you let fudge cool before cutting? ›
Allow the pot to rest in that water for 5 minutes. Set the pot on the counter. Scatter the cooled butter, the rest of the chopped chocolate, and the vanilla on top of the fudge mixture. Allow the fudge to cool until it reaches 115–125°F (46–50°C), checking every 10-15 minutes with your Thermpen ONE.
What is the secret to non grainy fudge? ›
While you ultimately want crystals to form, it's important that they don't form too early. The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.
Can you fix grainy fudge? ›
If you discover that your mixture is grainy, some quick thinking will save the entire batch. Pour the fudge back into your pan, and add about a cup of water to it, along with a tablespoon or two of evaporated milk, whipping cream, or whatever cream you're using.
How long do you let fudge cool before beating? ›
Fudge 102 – newb's guide to getting started
- about 18 min to reach boiling.
- about 40 minutes to reach soft ball stage.
- 60 minutes to cool.
- 28 minutes to beat in a KitchenAid (your time for this may vary)
- 4 hours to set.
Keep a bowl of water inside the microwave along with the fudge to create moisture for the pieces to inhale. Next, microwave the fudge pieces for just 10 seconds. So it will become soft but it won't have the correct consistency as before.
